User Manual

HARDWARE INSTALLATION

Basic Configuration Setup

3-6 P-Com AirPro Gold

3 Remove the switch plate from the front of the unit.

Set the RF channel switches according to Table 3-1..

Set the topology according to Table 3-2.

4 Set Switch 11—Antenna Alignment to OFF.

5 Set Switch 12—Reset Network Configuration to OFF.

When you move the AirPro Gold unit from one network to another, you will

need to reset the moved unit’s configuration by setting switch 12 to ON.

ANTENNA ALIGNMENT

Using the DIP switches on the front of the AirPro Gold unit, you can

start the antenna alignment utility to align a Star Remote unit antenna.

Table 3-1 RF Channel Switch Positions (20 MHz)

Channel

Center

Frequency Switch

(MHz) 1 2 3 4

1 2411.000 OFF OFF OFF ON

2 2416.000 OFF OFF ON OFF

3 2421.000 OFF OFF ON ON

4 2426.000 OFF ON OFF OFF

5 2431.000 OFF ON OFF ON

6 2436.000 OFF ON ON OFF

7 2441.000 OFF ON ON ON

8 2446.000 ON OFF OFF OFF

9 2451.000 ON OFF OFF ON

10 2456.000 ON OFF ON OFF

11 2461.000 ON OFF ON ON

12 2466.000 ON ON OFF OFF

13 2471.000 ON ON OFF ON

Table 3-2 Topology Switch Positions

Switch

Topology 9 10

Star Remote OFF OFF

Star Base OFF ON

Peer-to-Peer ON OFF

Point-to-Point OFF ON

NOTE

✐