User Manual

PRODUCT OVERVIEW
Product Description
1-4 P-Com AirPro Gold
1
FRONT PANEL
Figure 1-2 AirPro Gold Front Panel
The AirPro Gold front panel (see Figure 1-2) includes:
➀ETHERNET—RJ-45 jack for Ethernet connection (10/100 base-T);
illuminated green LED indicates unit sees Ethernet connection, OFF
indicates no connection; illuminated yellow LED indicates no traffic on
the Ethernet bus, flashing indicates traffic on the bus
➁RS232—RS-232 port for direct connection to a terminal or external
telephone modem
➂DIP SWITCHES—12 up/down (ON/OFF) toggle switches for manual
RF configuration (under removable metal plate)
➃RSSI—7-element LED bar that illuminates during normal operation
to indicate the quality of the receive signal; sequential illumination of
each LED during startup indicates that the initialization self-test is in
progress; no illumination of the LEDs at the end of startup indicates
successful completion of self-test
➄Front Panel LED Indicators
ALARM—Red LED illuminates when major events in the link
(including remote units fail).
LINK— Green LED illuminates when the link with the far end unit/units
is established.
ETHERNET LINK—Green LED illuminates when the unit indicates
that connection with the Ethernet segment is established.
ETHERNET ACTIVITY—Yellow LED illuminates when there is
activity with the Ethernet segment.
DATA TX—Yellow LED illuminates when the unit transmits the Data
frame (the Control frames are not indicated).
POWER—Yellow LED illuminates when unit power is ON.
Ethernet
RS232
RSSI
Alarm
Link
Ethernet Link
Ethernet Activity
Data TX
Power
1 2 3 4 5
APG2_008