User Manual

Airlink Pro T1/E1 Rack Mount Installer’s Guide
Operations and Maintenance
Rev. B - 1/97
4-3
❚ Burst Synchronization Loss
❚ Test in Progress
❚ DTE Alarm Indicator Signal (AIS)
❚ RF Alarm Indicator Signal (AIS)
❚ Transmit module failure
❚ Receive power level
❚ Transmit power level
❚ Temperature
All this information is available from both the local and the remote AirLink
Pro T1/E1 Rack Mount units.
Viewing Status Information
To view the status information for the local unit, type the following command
at the AirLink Pro T1/E1 Rack Mount prompt:
AIRLINK PRO T1/E1> query status
The system displays a list of status information similar to the following:
AIRLINK PRO T1/E1> query status
Site Name: Sunnyvale 2
DTE Loss: NO
Radio Sync Loss: NO
Burst Sync Loss: N/A
Test in Progress: FE Radio Remote Loop
DTE AIS: OFF
RF AIS: OFF
Tx Fail: NO
Rx Power: -60.5 dBm
Tx Power: 12.0 dBm
Temperature: 5 C
The significance of these information categories is explained in the following
sections.