User Manual

Cylink Corporation provides this Manual “as is,” without warranty of any kind, either express or implied,

including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Cylink Corporation may make improvements and changes to the product described in this Manual at any

time and without any notice. Cylink Corporation assumes no responsibility for its use, nor any infringements

of patents or other rights of third parties that would result.

This Manual could contain technical inaccuracies or typographical errors. Periodic changes are made to the

information contained herein; these changes will be incorporated in new editions of the Manual.

No part of this publication may be stored in a retrieval system, transmitted, or reproduced in any way,

including but not limited to photocopy, photograph, magnetic or other records, without the prior written

permission of Cylink Corporation.

CYLINK



is a registered trademark of Cylink Corporation; AirLink is a trademark of Cylink Corporation.

PRODUCT COMPATIBILITY

While every effort has been made to verify operation of this product with many different communications

products and networks, Cylink Corporation makes no claim of compatibility between its products and other

vendors’ equipment. It is assumed that users have thoroughly evaluated this product’s performance in the

communications environment in which it will be used.

SAFETY

The following general safety precautions must be observed during all phases of operation and service of this

product. Failure to comply with these precautions or with specific warnings elsewhere in this Manual willfully

violates standards of design, manufacture, and intended use of the product. Cylink Corporation assumes no

liability for the customer’s failure to comply with these requirements.

This product must be grounded. In the event of a short circuit, grounding reduces the risk of electrical shock

by providing an escape wire for the current.

Do not install or operate this product in the presence of flammable gases or fumes. Operation of any

electrical instrument in such an environment constitutes a definite safety hazard.

No user maintained or adjustable components are present within this product. The covers should not be

removed by anyone other than authorized Cylink service personnel. The potential for electrical shock exists

within the enclosure at all times unless it is unplugged.

Do not install substitute parts or perform any unauthorized modification to the AirLink Pro T1or E1. Return

the product to Cylink Corporation for service and repair to ensure that safety features are maintained. Prior

to returning any product(s) for repair, contact Cylink at the telephone numbers or address located on the

front of this Manual, and obtain a Return Material Authorization (RMA) number.

Changes or modifications not expressly approved by Cylink Corporation can void the user’s authority to

operate the equipment.