User Manual

AirLink Pro T1/E1 Rack Mount Installer’s Guide
Index
Rev. B - 7/97 Index-3
F
fire resistance, B-2
full-duplex, 1-4
G
get configuration command, 3-26
get revision command, 3-27
get threshold command, 3-27
H
help command, C-6
Hub, 3-8
HDB3, 1-2,1-3
I
ISM, 1-2
indicators, 4-3
Installation, 2-8
L
list of commands, C-2
local operations, C-7
login command, 3-7
logout command, 3-7
loopback tests
local loopback
near-end, 4-18
far-end, 4-20
remote loopback
near-end, 4-19
far-end, 4-20
M
messages
fault, A-3
alarm, A-3
advisory, A-4
status, A-5
modem
dialout set-up commands, C-3
setting modem parameters, 3-22
O
Order Wire communication, 1-7, 2-16, 4-22
Overview, 3-2
P
password command, 3-7
performance information, 4-9
Ping-Pong analogy, 1-2,1-4
PN code command, 3-16
power-on self-test, 2-16
power supply
ELPAC, 2-19
FORTRON, 2-20
Point-to-point link, 3-15
Preparing a Place, 2-4
pseudo-random noise. (see PN code)
Q
QRSS. (see Radio QRSS)
query alarms command, 4-6
query performance command, 4-9
query status command, 4-3
R
radio burst, 1-4
radio QRSS
BER, 4-10
initiating the test, 4-13
terminating the test, 4-14
radio sync loss, 4-3
rear-panel connectors, 2-3
receive power level, 4-5
remote operations, C-7
reset alarms command, 4-8
reset QRSS command, 4-11
resetting performance counters, 4-4
RF AIS, 4-4
RF setup parameters
application, 3-14
burst mode, 3-18
PN code, 3-19
RF power level, 3-20
rx power command, 3-20
Rx power threshold, 3-20
S
safety, B-3
setting modem paramenters, 3-23
setting up instructions, 2-6
shock specifications, B-3
site name, 3-5, 4-3
site name command, 3-9
site name parameter, 3-10
signal-to-Pin Assignments, B-7