User Manual

AirLink Pro T1/E1 Rack Mount Installer’s Guide
Commands
Rev. B - 1/97
C-7
If you press <Return> before the command is complete, the command interpreter
displays the next valid keyword or operand that you can enter. If the command
is complete, the system will execute the command.
You can also type in a help request for a particular command combination, to see
what comes next:
AIRLINK PRO T1/E1> help set
The system displays a similar list:
Site Name: Sunnyvale 2
Keywords or Operand
APPLICATION
SITE
BURST
CODING
PN
RF
ALARM
DATE
THRESHOLD
TIME
PASSWORD
Type HELP LOCAL SET <keyword> for more help.
Local or R emote O perations
The terminal user interface allows a terminal device or personal computer
attached to an AirLink Pro T1/E1 Rack Mount to control and monitor AirLink
Pro T1/E1 Rack Mount operation at either end of the point-to-point link. Any
command that starts with the REMOTE keyword causes the action to be
performed at the far-end AirLink Pro T1/E1 Rack Mount.
Do not include the LOCAL keyword to execute a command on the local unit; you
must include the REMOTE keyword in order to execute a command on the remote
unit.