User Manual

Airlink Pro T1/E1 Rack Mount Installer’s Guide
Commands
Rev. B - 1/97
C-2
C ommand Keyword List
This section lists the available command keywords and operands used to set,
view, or change configuration parameter values. The command line syntax uses
a set of keywords to get or set parameters, to query status, and to reset counter
and queues. Only the first four letters of each keyword are necessary. Add
space between keywords.
S etup C ommands
HELP
LOCAL (Local is implied and doesn’t need to be typed in)
REMOTE
SET
APPLICATION 1........8
1. Primary Master in a Hub
2. Secondary Master in a Hub
3. Master Unit at a Repeater
4. Master Unit in a Point to Point
5. Slave Unit at a Repeater Site
6. Slave Unit in a Point-to-Point Link
7. Secondary Master in a protected Link
8. Backup Master in a Hub
SITE NAME: { Up to 60 Characters}
BURST MODE: {Normal | Test}
CODING: {HDB3 | B8ZS | AMI}
EQUALIZATION: { 0 | 133 | 266 | 399 | 533}
HUBSYNC: {Single | Dual}
INTERFACE: {Balanced | Unbalanced}
ORDERWIRE: {2W | 4W}
PN CODE: {1...8}
RF POWER: {-3...20}