User Manual

AirLink Pro T1/E1 Rack Mount Installer’s Guide
Specifications
Rev. B - 1/97
B-19
Configuration Defaults
The following table lists default configuration/operational values.
Table B-18
Configuration Defaults
Parameter Value Notes
Application 4. Master Unit in a Point-to-
Point Link
Site Name (Blank)
Burst Mode Normal
Coding B8ZS
Equalization 0 (0 - 133 feet)
PN Code 1
RF Power 0 (dBm)
Alarm Reporting Immediate
Alarm level Status
Date 01/01/91
Time 00:00:00 (midnight)
Password <Return>
1 HR ES Threshold 1
1 HR UAS Threshold 1
24 HR ES Threshold 1
24 HR UAS Threshold 1
Rx Power Threshold -75 (dBm)
Tx Power Threshold -6 (dBm)
The prompt is reprinted when the <ENTER> key is pressed and the command
line is empty. All command responses end with a new prompt. When printing
formatted text, tabs are not used; all alignment is performed with spaces to
remove any problems associated with the interpretation of tab stops on
customer equipment. If an incomplete command line is issued, the text to finish
the command line is returned.