User Manual

AirLink Pro T1/E1 Rack Mount Installer’s Guide
Specifications
Rev. B - 1/97
B-15
CSU
Connector Location: Rear Panel
Connector Type: Six-Pin Captive Wire Terminal Block
Table B-16
CSU
Pin Signal Description Direction
1 IN Input Data (Tip) To AirLink Pro T1
2 IN Input Data (Ring) To AirLink Pro T1
3 GND Cable Shield Ground
4 OUT Output Data (Tip) From AirLink Pro T1
5 OUT Output Data (Ring) From AirLink Pro T1
6 GND Cable Shield Ground
DTE
Connector Location: Rear Panel
Connector Type: Six-Pin Captive Wire from Block
Table B-17
DTE
Pin Signal Description Direction
1 IN Input Data (Tip) To AirLink Pro T1
2 IN Input Data (Ring) To AirLink Pro T1
3 GND Cable Shield Ground
4 OUT Output Data (Tip) From AirLink Pro T1
5 OUT Output Data (Ring) From AirLink Pro T1
6 GND Cable Shield Ground