User's Manual
Table Of Contents
- Chapter 1 Introduction
- Features and Benefits
- Features
- Chapter 2 Quick Start
- System Description
- Package Contents
- Installation Steps
- Installation Diagram
- Polarizations on a Grid Antenna
- Chapter 3 Hardware
- Drawings of Components
- Restoring Factory Default Settings on the SPEEDLAN
- Upgrading the Firmware
- Chapter 4 Overview of Configurator
- Installation and Setup
- Toolbar and Menus
- Chapter 5 Configuring SPEEDLAN
- General Setup
- Interface & Advanced Interface Setup
- The Setup Buttons
- Chapter 6 Bridging Setup
- Bridge Setup
- Chapter 7 Setting Up the IP Addresses (IP Host Setup)
- Part I - Quick Overview of IP Addressing
- Part II - Setting Up the IP Address
- Part III - Setting Up NAT
- Chapter 8 IP-Router Setup
- IP Routing Setup
- Chapter 9 SNMP Setup
- SNMP Setup
- Chapter 10 System Access Setup
- System Access Setup
- Chapter 11 SNMP Monitoring
SPEEDLAN Installation and Operation User Guide
Overview of Configurator 4-5
Quick Overview of Other Menus
•
View Menu - This menu is used to change the display of the Configurator's various items.
• Setup Menu - This menu is used to modify all aspects of the brouter.
• Monitor Menu - This menu is used to monitor the brouter's performance and monitor
another brouter.
• Analyze Menu - This menu is used to select another brouter and perform various tests (i.e.,
interval test, wireless link test, or antenna alignment test)
• Help Menu - This menu is used to troubleshoot questions pertaining to the SPEEDLAN
Configurator.