User's Manual

SPEEDLAN Installation and Operation User Guide
11-10 SNMP Monitoring
SectorPRC Station Entries
This displays the wireless stations connected to the brouter.
• Station Name
Name of system assigned in the SNMP Setup for a brouter or in the Network Control Panel
for Single Device Adapters (Note: Single Device Adapters will only communicate with a
SPEEDLAN ISP series base station. They will appear on the Wireless Remote Entries
dialog box of a shelfmount series base station, if the base can hear their RF signal.)
• Type
Valid entries are: Base, Remote, Peer, and Offline.
• Transmit
Number of transmissions from the wireless station.
• Re-Transmit
Number of re-transmissions from the wireless station.
Note: A high number of re-transmit errors usually indicates that the signal quality is poor.
G-Link Base 207,568 601 0