User's Manual

SPEEDLAN Installation and Operation User Guide
13-2 Analyzing Wireless Equipment
Select Another Device
Use this feature to select another pair of bridges, routers or remote brouters. This is a helpful
feature when running a wireless link test. Note that you must scan the brouter before selecting
another device.
To select another wireless device, do the following:
1 From the Analyze, menu, choose Select Another Device.
2 The Enter IP Address dialog box appears.
3 Verify the information in the Enter IP Address dialog box and click Scan. This opens the
Scan dialog box, which allows you to select the new pair.
4 Select the pair and click OK. Verify the Remote and IP Address and Read/Write Password in
the Enter IP Address dialog box. Then, click OK. The SPEEDLAN Configurator confirms that
the device was located. Click OK again. You have successfully selected another device and
test the pair as needed.