User's Manual
Table Of Contents
- Chapter 1 Introduction
- Features and Benefits
- Transparent Ethernet Bridging with Advanced Filtering for Security and Network Reliability
- IP Routing with Advanced Filtering for Security
- SNMP Management
- SNMP Features
- SNMP Management
- IP-Router Features
- Encryption Features (Add-on Option)
- Wireless Multipoint Protocol
- Additional Functionality for SPEEDLAN 4100 & 4200
- Features
- Chapter 2 Quick Start
- System Description
- Package Contents
- Installation Steps
- Installation Diagram
- Polarizations on a Grid Antenna
- Chapter 3 Hardware
- Upgrading the Firmware
- Chapter 4 Overview of Configurator
- Installation and Setup
- Toolbar and Menus
- Chapter 5 Configuring SPEEDLAN 4100 & 4200
- General Setup
- Interface & Advanced Interface Setup
- The Setup Buttons
- Chapter 6 Bridging Setup
- Bridge Setup
- Chapter 7 Setting Up the IP Addresses (IP Host Setup)
- Part I - Quick Overview of IP Addressing
- Part II - Setting Up the IP Address
- Chapter 8 IP-Router Setup
- IP Routing Setup
- Chapter 9 SNMP Setup
- SNMP Setup
- Chapter 10 System Access Setup
- System Access Setup
- Chapter 11 SNMP Monitoring
- Remote Statistics
- Interface Monitor
- Ethernet-like Interface Monitor
- Campus PRC Station Entries
- 11Mb RF Interface
- SNMP Monitor
- IP Monitor
- IP/TCP/UDP Monitor
- ICMP Monitor
- Chapter 12 Tables
- System Information
- Bridge Learn Table
- IP ARP Table
- IP Route Table
- IP/TCP Connection Table
- IP/UDP Listener Table
- Local IP-Address Table
- Chapter 13 Analyzing Wireless Equipment
- Select Another Device
- Analysis Polling Interval
- Wireless Link Test
- Antenna Alignment
- Glossary for Standard Data Communications
- Glossary for Standard Data Communications
- Appendix Protocols & Ethernet Addresses
- Common Ethernet Protocols
- Common Ethernet Vendor Addresses
- Common Ethernet Multicast Addresses
- Common Ethernet Broadcast Addresses
SPEEDLAN 4100 & 4200 Installation and Operation User Guide
1-4 Introduction
Wireless Multipoint Protocol
Campus Cell PRC features provide multipoint networking, improved performance, and increased
reliability. In multipoint networks, a SPEEDLAN 4100 acts as a central base station with responsibility
to manage the flow of data within the radio cell. When necessary, packets are repeated or
retransmitted by this brouter, allowing communications between multiple remote networks by using
SPEEDLAN 4200.
Additional Functionality for SPEEDLAN 4100 & 4200
• RF cable loss is negligible
• Brouters can be mounted in more remote locations because Ethernet cable is connected to
the brouters
• Increased RF power to the antenna will mean longer links are possible without using an
amplifier
Features
• 10BASE-T Ethernet interface
• SPEEDLAN 11 Mb Wireless Radio
• Bridging Features
• Protocol Transparent Bridging
• IP Routing
• Filtering by Ethernet Multicast, Broadcast and Bad Packets
• Filtering by Protocol
• Filtering by Ethernet Address Pair
• Generic Ethernet Tunneling through IP Networks
• Learned Table Lockdown
• Expanded IP ARP Support
• Automatic Broadcast Storm Protection and Notification