User's Manual

SPEEDLAN TM

General Setup Menu

The third menu from the left is the Setup Menu. In this menu are the screens you will use to configure your

brouters. Below are descriptions of the menu items and the settings found on their respective screens.

Enable IP Routing - The transparent routing function will be enabled when this is item is checked. IP Routing

will work properly only if the routes are set up in the IP Route Menu. If the routes are not set up properly

before you save the configuration, the bridge will become inoperable. Default is off.

Enable Bridging - The transparent bridging function will be enabled when this is item is checked. If you want

the brouter to perform the bridging function,you must enable this. When bridging is enabled, the Bridge Setup

Screen will be accessible. Bridging should be enabled for nearly all applications of the brouter. Default is on.

(This function should never be disabled.)

General Setup