User's Manual

SPEEDLAN TM
57
Enable Proxy ARP - This feature allows the brouter to be used as the proxy host for users on the local
network. This instructs the brouter to act as a “proxy” for the local destination host. This is used in
circumstances that require connections not normally permitted for individual users on a network.
Enable BOOTP/DHCP Forwarding - This feature allows the unit to pass BOOTP and DHCP requests
across the wireless network.
Forwarding Host - Defines the IP address of the device configured to act as the forwarding host for
BOOTP and DHCP messages in a routed network.
Accept RIP For the Following Routes - Normally RIP instructs the brouter to forward all route information
gathered to all RIP devices located on you network. Specifying devices in the RIP Access List allows you to
limit which devices will be sent RIP. The devices specified in this list will be the only devices to receive RIP,
while all other devices will be denied the RIP information stored on this brouter.