User Manual

ManualsBrandsWave Wireless Networking ManualsElectronicsPoint to Point Spread Spectrum Transceiver

100

SC5800 User Manual

Object ID Group Object Type Access Description

users.

1.3.6.1.4.1.1316.1.1.1.4.6.1.7 mdrmteUserDelete INTEGER write-only In security-enabled mode,

allows an administrator to delete

users.

1.3.6.1.4.1.1316.1.1.1.4.7 mdrmteRFLinkIPAddress IpAddress read-write PPP IP address for the RF Link.

The user need not adjust this

parameter.

1.3.6.1.4.1.1316.1.1.1.4.8 mdrmteRFLinkNetMask IpAddress read-write PPP IP netmask for the RF

Link. The user need not adjust

this parameter.

1.3.6.1.4.1.1316.1.1.1.4.9 mdrmteRemoteIPAddress IpAddress read-write Default PPP IP address for the

other end of the RF link.

1.3.6.1.4.1.1316.1.1.1.4.10 MdrmteElementManagerIPAddress IpAddress read-write Default PPP IP address for the

the element manager port -

10.13.1.1 for a 'local IU' and

10.12.1.1 for a 'remote IU'.

1.3.6.1.4.1.1316.1.1.1.4.11 MdrmteElementManagerNetMask IpAddress read-write IP netmask for the Element

Manager PPP port.

1.3.6.1.4.1.1316.1.1.1.4.12 MdrmteIPNegotiable INTEGER read-write Determines if the local PPP IP

address is negotiable or not -

does not need to be adjusted

by the user.

1.3.6.1.4.1.1316.1.1.1.4.13 MdrmtePPPisDefaultRoute INTEGER read-write Determines if PPP interface is

the default route - does not

need to be adjusted by the user.

1.3.6.1.4.1.1316.1.1.1.4.14 MdrmteStaticRouteTable SEQUENCE

1.3.6.1.4.1.1316.1.1.1.4.14.1 MdrmteStaticRouteEntry SYNTAX

1.3.6.1.4.1.1316.1.1.1.4.14.1.1 MdrmteStaticRouteIndex INTEGER

1.3.6.1.4.1.1316.1.1.1.4.14.1.2 MdrmteStaticRouteIPAddressDestination IpAddress read-write Ultimate destination.

1.3.6.1.4.1.1316.1.1.1.4.14.1.3 MdrmteStaticRouteIPAddressMask IpAddress read-write net mask, 255.255.255.255 if

destination is host address.

1.3.6.1.4.1.1316.1.1.1.4.14.1.4 mdrmteStaticRouteIPAddressNextHop IpAddress read-write Where to forward.

1.3.6.1.4.1.1316.1.1.1.4.14.1.5 mdrmteStaticRouteInterfaceForNextHop INTEGER read-write Interface (net) for nexthop.

1.3.6.1.4.1.1316.1.1.1.4.15 mdrmteBridgeEnable† INTEGER read-write Determines if the system is to

act as a transparent bridge for

all Ethernet packets received.

1.3.6.1.4.1.1316.1.1.1.4.16 mdrmteEthernetFullDuplex† INTEGER read-write Determines if the Ethernet

interface is full- or half-duplex.

1.3.6.1.4.1.1316.1.1.1.5 mdrmteRelayOutputs

1.3.6.1.4.1.1316.1.1.1.5.1 mdrmteRelay1

1.3.6.1.4.1.1316.1.1.1.5.1.1 mdrmteRelay1Label DisplayString read-write A short, descriptive name

indicating the primary function

of the relay, most probably in

terms of the equipment

connected to it.

1.3.6.1.4.1.1316.1.1.1.5.1.2 mdrmteRelay1OpenStateLabel DisplayString read-write A short, descriptive name

indicating the primary function

of the relay in the open state,

most probably in terms of the

equipment connected to it.

1.3.6.1.4.1.1316.1.1.1.5.1.3 mdrmteRelay1ClosedStateLabel DisplayString read-write A short, descriptive name

indicating the primary function

of the relay in the closed state,

most probably in terms of the

equipment connected to it.