User Manual

SC5800 User Manual
83
10.2 The MIB Elements – OID (Object ID) DESCRIPTIONS
Object ID Group Object Type Access Description
1 Iso
1.3 Org
1.3.6 dod
1.3.6.1 internet
1.3.6.1.4 private
1.3.6.1.4.1 enterprises
1.3.6.1.4.1.1316 Wave Wireless
1.3.6.1.4.1.1316.1 products
1.3.6.1.4.1.1316.1.1 digitalradio
1.3.6.1.4.1.1316.1.1.1 mdrmte
1.3.6.1.4.1.1316.1.1.1.1 mdrmtePerformance
1.3.6.1.4.1.1316.1.1.1.1.1 mdrmtePayloadPerf
1.3.6.1.4.1.1316.1.1.1.1.1.1 mdrmtePpTable SEQUENCE
1.3.6.1.4.1.1316.1.1.1.1.1.1.1 mdrmtePpEntry SYNTAX
1.3.6.1.4.1.1316.1.1.1.1.1.1.1.
1
mdrmtePpIndex INTEGER
1.3.6.1.4.1.1316.1.1.1.1.1.1.1.
2
MdrmtePpLOS INTEGER read-only A Loss of Signal has been
detected on the input to a
tributary - there are four, one
for each tributary.
1.3.6.1.4.1.1316.1.1.1.1.1.1.1.
3
MdrmtePpAIS INTEGER read-only An Alarm Indication Signal has
been detected on the input to a
tributary - there are four, one
for each tributary.
1.3.6.1.4.1.1316.1.1.1.1.1.2
mdrmteCrcErrors† INTEGER read-only "The number of CRC4 or CRC6
errors seen on the selected
tributary since the last time
errors were cleared."
1.3.6.1.4.1.1316.1.1.1.1.1.3
mdrmteCrcTribSelect† INTEGER Rd-Write "The tributary selected for CRC
checking."
1.3.6.1.4.1.1316.1.1.1.1.1.4
mdrmteCrcLock† INTEGER read-only "Indication of whether the CRC
checking algorithm has locked
onto a CRC frame signature in
the payload data."
1.3.6.1.4.1.1316.1.1.1.1.1.5 MdrmteCrcEbit† INTEGER read-only "Reflects the status of the 'E'
bits in the frame."
1.3.6.1.4.1.1316.1.1.1.1.2 mdrmteRFLinkPerf
1.3.6.1.4.1.1316.1.1.1.1.2.1 mdrmteCarrierDetect INTEGER read-only Indicates if a RF Carrier has
been detected by Outdoor Unit
– if so, the header in the RF
Packet has been identified as a
potential valid packet - note
however, that it could be
received from another
transmitter that uses the same