User Manual

SPEEDCOM SC5800 User

Manual

There are three principle requirements to use SNMP with the SC5800 Radio Stations.

1. A Management Station that runs a SNMP Management Software package that is

installed on a networked or stand-alone PC that can be connected to an Indoor Unit either

using a serial connection or an Ethernet connection. From the Management station, the

agents within the SC5800 Indoor Units can be configured or polled for information.

2. Agent: The agent accepts SNMP GET, SET or GET-NEXT commands from the

Management Application software and collects or adjusts information from the Indoor

Unit's MIB.

3. Management Information Base (MIB): the MIB is a database that is accessed based on

the OID (object ID) the SNMP Manager has chosen. The SPEEDCOM (SC) Indoor Unit

used an Enterprise MIB and a standard MIB (MIB II) to store or allow access to

information relevant to the SPEEDCOM (SC) Link.