User Manual

SPEEDCOM SC5800 User Manual
64
8.6 Ordering Information
Terminal Information
Terminals*
Product
Description
D1-58-HB-5800 651-03853ET1HB SPEEDCOM SC5800 1x T1/E1 (High Band)
D1-58-LB-5801 651-03853ET1LB SPEEDCOM SC5800 1x T1/E1 (Low Band)
D2-58-HB-5802 651-03853ET2HB SPEEDCOM SC5800 2x T1/E1 (High Band)
D2-58-LB-5803 651-03853ET2LB SPEEDCOM SC5800 2x T1/E1 (Low Band)
D4-58-HB-5804 651-03853ET4HB SPEEDCOM SC5800 4x T1/E1 (High Band)
D4-58-LB-5805 651-03853ET4LB SPEEDCOM SC5800 4x T1/E1 (Low Band)
Notes:
• Complete link requires two radios: one must be High Band (HB) and the other a Low
Band (LB).
• SC5800 operates from 21 - 56 VDC. For operation using AC power, please order item #
651-03864 (Bench AC Power Supply).
• Each radio includes a 10Base-T Ethernet interface in addition to the primary payload and
provides a 2 Mb wayside Ethernet channel.
Accessories & Upgrades
Part Number Description
651-03864 Bench Power Supply 110-220VAC to 48VDC
651-03865 SC5800 Upgrade 1xE1/T1 to 2xE1/T1
651-03866 SC5800 Upgrade 2xE1/T1 to 4xE1/T1
651-03867 SC5800 Upgrade 1xE1/T1 to 4xE1/T1
The SC5800 uses standard CAT5 Ethernet cable and RJ-45 connectors for connecting the Indoor
Unit to the Outdoor Unit. A two-wire power cable is also required between the Indoor Unit and the
Outdoor Unit. Note Screened Cat5 cable and UV resistant cables are recommended for long-term
outdoor use.