User Manual

SPEEDCOM SC5800 User Manual

4 INSTALLATION

This section describes a recommended installation procedure for the SC5800.

Recommended installation procedure:

1. Install the Indoor Unit.

2. Prepare and connect the cables to the Indoor Unit.

3. Install the Outdoor Unit and antenna.

4. Install the Indoor-to-Outdoor Unit interconnection cables (the power and data

cables).

5. Turn the Indoor Unit power on.

6. Perform the initial software setup using the supplied NMS application

7. Repeat items 1-5 for the remote site.

8. Align the antennas (use the RSSI voltage on the OU or the RSSI value from

the MIB or the NMS Graphic User Interface to assist with the setup).

9. Perform a functional test and commission the link.

10. Connect to user data.

11. Start the system.

Installation of the SC5800 elements is described in the following sections:

• Installing the Indoor Unit.

• Installing the Outdoor Unit and Antenna.

• Installing the interconnection cables.