User Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
General Functions of the Configurator 3-43
Figure 3-34: DHCP Relay Configuration page
d) When you choose DHCP Relay, you will be asked to enter the IP
address of the DHCP server.
e) Next, you need to enable the Ethernet interface. Next, enter the IP
address of the DHCP server that is offering IPs to clients.
f) Once you have set up the SPEEDLAN 9000 router, configure the clients
to obtain an IP address from a DHCP server. If the SPEEDLAN 9000 is the
DHCP server, it will get the IP address directly from it. If the DHCP server is
located behind the SPEEDLAN 9000 routers, the DHCP request will be
forwarded to the DHCP server and then returned to the correct client
machine.