User Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
General Functions of the Configurator 3-41
Figure 3-32: DHCP General Clients
3 If you have IPs that should be assigned to a particular device, do the following:
a) Go back to the DHCP Server menu and choose the correct interface.
Then, choose the Known Clients page (screen shot located after this
step). This page is shown in Figure 3-33 on page 3-42 (for definitions, see
Known Clients Elements Defined, page 3-46).
b) This is where you can then specify the computer name or MAC
address and the corresponding IP address that should be assigned to that
device at all times.