User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
3-38 General Functions of the Configurator
(Common static routes apply to multiple routers and propagate updates to other
routers.)
Figure 3-30: Common Static Route page
Note: The netmask is ignored for routes to specific hosts.
Near the top of the page you will see a dynamic list about local and common static
routes.
Near the middle of the page is where you can modify or add new static route
information, and these are defined below:
• Destination: The destination network or host.
• Interface: Select the appropriate interface from this drop-down list.
• Netmask: Select the appropriate value for the netmask (also in CIDR format
from /8 to /30) in this drop-down list. This is an abbreviated method of
entering the netmask. For more information, see CIDR Table (For Netmask
Information Purposes), page 3-22.
• Gateway: This is a network point that acts as the "entrance door" to another
network. This is the first router that takes you to the designated host (i.e., the
next hop on the network).