User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
3-36 General Functions of the Configurator
Note: If you want to create your own network route filter IP address, type them in the
four boxes provided below (each box represents the first, second, third and forth octet
in the IP address). Then, click the Add button to add the new IP address to the Filters
box.
Click Apply when you are finished making changes.
Route Table
The routing table displays routing information between destinations. To view routing
information, choose Route Table from the Routing menu. The following page will
appear.
Figure 3-28: Route Table page
Each statistic is defined below:
• Destination: This is the destination network or host.
• Gateway: This is a network point that acts as the "entrance door" to another
network. This is the first router that takes you to the designated host (i.e., the
next hop on the network).