User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
3-34 General Functions of the Configurator
Redistribute section:
• Static routes: Select this check box to redistribute static routes so all routers
know who it has to pass through to get to the destination. Do not select this
check box if you do not want other devices on the network to learn its static
route. A static route is an IP path from one point on the network to another
point on the network.
• Connected routes: Select this check box to redistribute connected routes,
which tells the network where it is connected. Do not select this check box if
you do not want other devices on the network to know who the router is
connected.
Click Apply when you are finished making changes.
RIP Settings
To set up RIP 2 settings, from the Routing menu, choose RIP2 Setup + the interface
(e.g., Ethernet or StarNet). The following page will appear.
Figure 3-27: RIP Settings page