User Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
General Functions of the Configurator 3-33
RIP2 Setup
To set up global settings for RIP, from the Routing menu, choose RIP2 Setup + Global
Settings. The following page will appear.
Figure 3-26: RIP Global Settings page
The following RIP Global Settings parameters are described below:
• Off: Select to disable RIP.
• RIP 1: Select to enable RIP 1.
• RIP 2: Select to enable RIP 2.
• RIP 1 and RIP 2: Select to enable RIP 1 and RIP 2.