User Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
General Functions of the Configurator 3-11
There are five classes of users on the SPEEDLAN 9000. The classes are as follows with
their default passwords:
• Full Access (also known as a superuser): "wave_full" (this is also the only
access password for IP Recovery).
Note: "Full Access" does not show up in "Admin/Users" because the user will
not be able to change its permissions and it has write permission on
everything.
• Wired Admin: "wave_wired_admin" (account for the private Ethernet network)
• Wired Read: "wave_wired" (account for the private Ethernet network)
• Wireless Admin: "wave_wireless_ad" (account for the wireless SPEEDLAN
9000 network)
• Wireless Read: "wave_wireless" (account for the wireless SPEEDLAN 9000
network)
Notes:
The minimum password length is 8 characters. The maximum password length is 16
characters (including the underscore character or spacebar). Any characters over the
maximum length (16) will be truncated. This rule applies for the Configurator,
SPEEDView, SPEEDSignal and IP Recovery.
Admin accounts have administration rights to their appropriate network (wired or
wireless), and Read Only accounts have only read only access.
If you are a network administrator and want to modify the default passwords and
settings for any of the users, choose the Admin menu. For more information, see
Admin Menu, page 3-73.
Logging On
Follow these steps (starting on the following page) to log on to the SPEEDLAN 9000
Configurator.