User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
2-2 SPEEDLAN 9101, 9102, 9103 & 9104 Hardware
Rooftop and Tower Installations Warning
Rooftop, tower, and other mounted location equipment installations are extremely
dangerous and incorrect installation can result in death, injury, or property damage.
General Safety Requirements for Installation of SPEEDLAN
9000 Models
1 The AC power socket outlet should be installed near the switching power
supply and junction box.
2 It is recommended that replacement of the battery which is soldered to the PC
board should be done by manufacturer or professional installer.
CAUTION: THERE IS RISK OF EXPLOSION IF BATTERY IS REPLACED BY
INCORRECT TYPE. DISPOSE USED BATTERIES ACCORDING TO
INSTRUCTIONS.
3 During installation of SPEEDLAN 9000 on the tower or on the wall,
the necessary clearance from the power and lightning conductors should be
maintained and proper grounding provided. The installation should be done
in accordance with National Electrical Code:
• NEC Article 725 – CEC Rule 16
• NEC Article 800 – CEC Section 60 and
• NEC Article 810 – CEC Section 54.
!
!!
!
!
!!
!