User Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
4-16 Using the Configurator to Set Up Special Parameters for a Base Station
Software Update
To update the software on the local base station or on the remotes (e.g., CPE, Ethernet,
etc.), choose Software Update from the Admin menu. The Software Update page will
appear (for Local or Star Net). Note: The Software Update zip file (found on the Wave
Wireless web site under the Support + Firmware link) will contain a document
describing the recent changes and any other additional information needed to perform
the update. The zip file will also include the update (.wwn) file to perform the update.
After you have unzipped the file, make sure you extract the update file (.wwn) file to
your desktop. Then, follow these directions:
Updating the Local Base Station
If you only need to update the software on a base station, choose Local (under the
Software Update submenu).
Figure 4-10: Updating the local base station