User Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
Using SPEEDView 8-15
• e: Executes the bandwidth test.
• f: Displays results of the bandwidth test (in Mb/s).
• g: Closes the Bandwidth Test dialog box.
• h: Displays the results of the bandwidth test.
Performing a Ping Test
1 Click the node(s) you want to ping.
2 Choose Ping Test from the Link menu. The Ping Test dialog box will appear,
as shown in Figure 8-11 on page 8-15.
Figure 8-11: Ping Test dialog box
The elements on the Ping Test dialog box are described below:
• a: Pings the path to the right (e.g., from Node A to Node B).
• b: Pings the path to the left (e.g., from Node B to Node A).
• c: The status bar.
a
d
c
e
f
b
Displays IP address of
selected left node.
Displays IP address of
selected right node.