User Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
IP Recovery (Appendix B) - 5
Setting a Temporary IP Address
1 Select the host for the router that you want to set a temporary address by
selecting it (as shown in the example below).
Setting a Temporary IP address
2 Click the Set Temporary IP button on the IP Recovery dialog box to set a
temporary Ethernet IP address for the router. You will be allowed to enter a
temporary IP address to connect to the router. The Set Temporary IP Address
dialog box will appear as shown below.
Setting the temporary address and netmask
3 Enter the temporary address in the IP Address textbox.
4 Next, select the netmask for the router.
5 The password entry is for full access rights only. The default password is
"wave_full". Again, this can be altered in the SPEEDLAN 9000 Configurator.
1
2
3
4
3
5
6