User's Manual
Table Of Contents
- Chapter 1 Introduction
- Features and Benefits
- Equipment Features
- SPEEDLAN K2's Polling Protocol -- How it Works in Star Networks
- SPEEDLAN 9000 Mesh Protocol -- How It Works in Non-Line-of-Sight Networks
- Chapter 2 Installing the SPEEDLAN 9101 & SPEEDLAN 9102 Hardware
- Rooftop and Tower Installations Warning
- Hardware Overview
- Drawings of Outdoor, Remote-Mounted Components
- The SPEEDLAN 9101 (with an Attached Standard Omni)
- The SPEEDLAN 9102 (with an External Antenna)
- Chapter 3 Using the SPEEDLAN 9000 Configurator
- Initial Configuration of the SPEEDLAN 9000
- Overview of the SPEEDLAN 9000 Configurator Main Menu
- Logging on to the SPEEDLAN 9000 Configurator
- Interfaces
- System
- Routing
- Wireless
- DHCP Server
- DHCP Relay
- NAT
- Diagnostics & Troubleshooting
- Administrative Access Pages
- Chapter 4 Using SPEEDView
- What is SPEEDView?
- System Requirements
- Installation Instructions
- Starting SPEEDView
- The Program Instructions
- The Main Tab
- Options Tab
- Admin Tab
- Chapter 5 Basics of IP Addressing
- Basics of IP Addressing
- Glossary for Standard Data Communications
- Glossary for Standard Data Communications
- Software License Agreement
SPEEDLAN 9000 Installation and Operation User Guide
3-38 Using the SPEEDLAN 9000 Configurator
The In Bound statistics are defined below:
• Msgs: The total number of ICMP messages which the entity received. Note that this counter
includes all those counted by icmpInErrors.
• Errors: The number of ICMP messages which the entity received but determined as having
ICMP-specific errors (bad ICMP checksums, bad length, etc.).
• Dest Unreach: The number of ICMP Destination Unreachable messages received.
• Time Exceeds: The number of ICMP Time Exceeded messages received.
• Param Problems: The number of ICMP Parameter Problem messages received.
• Src Quenches: The number of ICMP Source Quench messages received.
• Redirects: The number of ICMP Redirect messages received.
• Echos: The number of ICMP Echo (request) messages received.
• Echo Replies: The number of ICMP Echo Reply messages received.
• Timestamps: The number of ICMP Timestamp (request) messages received.
• Timestamp Replies: The number of ICMP Timestamp Reply messages received.
• Addr Masks: The number of ICMP Address Mask Request messages received.
• Addr Mask Replies: The number of ICMP Address Mask Reply messages received.
The Out Bound statistics are defined below:
• Msgs: The total number of ICMP messages which this entity attempted to send. Note that
this counter includes all those counted by icmpOutErrors.
• Errors: The number of ICMP messages which this entity did not send due to problems dis-
covered within ICMP such as a lack of buffers. This value should not include errors discov-
ered outside the ICMP layer such as the inability of IP to route the resultant datagram. In
some implementations there may be no types of error which contribute to this counter's
value.
• Dest Unreach: The number of ICMP Destination Unreachable messages sent.
• Time Exceeds: The number of ICMP Time Exceeded messages sent.
• Param Problems: The number of ICMP Parameter Problem messages sent.
• Src Quenches: The number of ICMP Source Quench messages sent.
• Redirects: The number of ICMP Redirect messages sent.
• Echos: The number of ICMP Echo (request) messages sent.
• Echo Replies: The number of ICMP Echo Reply messages sent.
• Timestamps: The number of ICMP Timestamp (request) messages sent.
• Timestamp Replies: The number of ICMP Timestamp Reply messages sent.