User's Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
Using SPEEDView 8-5
Note: You can change the default text for the SPEEDView application by clicking
Start+Settings+Control Panel+Display+Appearance tab. Then, select the
appropriate item in the Item list.
6 Next, the Interface Selection box appears which displays all the wireless
interfaces that are connected to the SPEEDLAN 9000 system.
Figure 8-3: (Available) Interfaces Selection box
7 Highlight the interface and click Select.
8 The following elements are displayed on this box:
• Description: A name for the interface (e.g., where it is located). This can
be changed in the SPEEDLAN 9000 Configurator.
• Type: Star (for base to CPE functionality) or mesh (nodes in a mesh
cloud). The star or mesh network will display on the Main tab, as shown in
Figure 8-4 on page 8-6.
• IP Address: This address tells the network how to locate the computers or
network equipment connected to it.
• Netmask: The netmask is a 4-byte number that masks the network part of
the Internet Protocol IP address, so that only the host computer part of the
IP address remains.
• Network: The address of the network.