User's Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
Using the Configurator to Set Up Special Parameters for Point-to-Point Routers 6-7
To authenticate a point-to-point secondary router only, choose Authentication from
the Network menu. The following page will appear.
Figure 6-5: Authentication Settings for Point-to-Point Secondary Router page
(while in Secondary mode)
• Pass Phrase: Enter a pass phrase and confirm it like setting up a regular
password. (Pass Phrases have a minimum of 8 characters and a maximum of
32 characters.)
• Confirm: Enter the pass phrase again to ensure it is correct. Make sure you
keep the pass phrase in a safe place.
Wireless menu
Configuration for Point-to-Point
Choose Configuration from the Wireless menu, and click one of the following
buttons:
• If you click the Channel and Rates button, you will be able to select the
channel and signaling rate of the interface. For more information, see
Channel and Rates, page 6-8.