User's Manual

Chapter 6
Using the Configurator to Set
Up Special Parameters for
Point-to-Point Routers
This chapter covers only those special parameters needed to set
up the point-to-point primary and secondary routers, such as:
• Network menu: Interfaces for Point-to-Point Mode,
page 6-2; Point-to-Point Settings, page 6-3; Primary
Station Information, page 6-6; and Authenticating a
Point-to-Point Secondary Router Only, page 6-6
• Wireless: Channel and Rates, page 6-8, Max Tx Retries
and Signaling Rate Fallback, page 6-10 and Max
Throughput (Regulating Bandwidth), page 6-12
• Admin: Remote Control for Point-to-Point Primary
Routers, page 6-13; Software Update for Point-to-Point
Primary or Secondary Routers, page 6-13; and
Updating the Software on a Local Router and Remote
Router: Primary Mode Only, page 6-15
All other common configuration information can be found in
General Functions of the Configurator, page 3-1.