User's Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
IP Recovery (Appendix B) - 7
1 Click the Transmit Power Test button.
Begin Transmit Test
2 The following dialog box will appear.
Transmit Power Test dialog box elements
3 Enter the length of time for the power transmit test in the Seconds text box.
(The default length is 30 seconds).
4 Next, enter the password in the Password textbox, depending on the type of
user access, as follows:
• Full Access (also known as a superuser): wave_full.
Note: "Full Access" does not show up in "Admin/Users" because the user
will not be able to change its permissions and it has write permission on
everything.
• Wired Admin: wave_wired_admin (account for the private Ethernet
network).
1
1
3
4
5
6
2