User's Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
General Functions of the Configurator 3-21
To activate this page, choose IP Addresses and then the name of the interface (i.e.,
Ethernet, Star Net, Mesh Net) from the Network menu. The following page will
appear.
The following page will appear.
Figure 3-17: IP Addresses page
After you choose the appropriate interface, you will be able to view the following
parameters:
• Hardware (MAC) Address: In a LAN environment each network interface
contains its own Medium Access Control (MAC) address which is the
embedded and unique hardware number.
• Status: This is the state of the interface. "Up" - ready to pass packets; "Down" -
cannot pass packets.
• IP Address: This address tells the network how to locate the computers or
network equipment connected to it.
• Netmask: The netmask is a 4-byte number that masks the network part of the
Internet Protocol IP address, so only the host computer part of the address
remains.
For Ethernet only
For wireless
interface