User's Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
3-18 General Functions of the Configurator
Helpful Information to Know...
How do you select the router?
As shown in Figure 3-14 on page 3-17, select the type of router (point-to-point, CPE,
base station, or mesh) from the Interface Type drop-down list. Then, click Apply. The
SPEEDLAN 9000 Configurator will then recognize the router you selected and allow
you to make modifications as needed.
Note: If you need to change the router's topology mode (base station, CPE, point-to-
point or mesh) from or to another topology mode (base station, CPE, point-to-point or
mesh), see Changing the Router's Topology Mode, Change Topology Mode, Appendix
A-2.
References on Setting Up the Router
The next step is to set up your router. Follow this chapter to set up the IP address, set
routing information, set DHCP, set NAT information, troubleshoot network errors
(diagnostic information), and enter basic Administrative information. Make sure you
see the section called, Overview of the SPEEDLAN 9000 Configurator General Main
Menu, page 3-7. This section will tell you which functions are common to all routers
and which functions are specialized. This will help you locate the proper section in the
manual more quickly.
Caching - viewing the most recent version of a page
Important Note: If you do not see the changes you made on a configurator page,
click the Refresh button, as shown in Figure 3-14 on page 3-17. Then, the changes
will appear.
If the above procedure does not work, follow these steps below:
1 Go to your Internet browser. (These directions are for Internet Explorer.)
2 From the Tools menu, choose Internet Options. The Internet Options dialog
box appears. Click the Delete Files button. Then, click OK.
3 On the Internet Options dialog box, click the Settings button. The Settings
dialog box appears. Select the Every visit to the page option. This makes
sure that the new information is displayed the next time you visit the
configurator web page, and the new information will also be added on the
SPEEDLAN router.