User's Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
Using the Configurator to Set Up Special Parameters for a Base Station 4-15
The Max Transmit Data Rate (in Kb/s) default is set to 6500; click Default to get default
value. The range is from 100 to 6500 Kb/s.
If you want to use these settings on remote routers, select them and click Apply to
Selected Nodes. If you want to select all of the routers, click Select All.
Admin Menu
Remote Control
To remotely reboot or turn off the SPEEDLAN 9000 base stations, choose Remote
Control from the Admin menu. The following page will appear.
Figure 4-9: Remote Control for base mode
Select the base stations you want to reboot and click Reboot Selected Nodes.