User's Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
3-70 General Functions of the Configurator
• Errors: The number of packets that did not reach their destination due to an
error.
• Collisions: The number of packets that did not reach their destination
because two network nodes tried to transmit at the same time.
Note: The statistics are refreshed every time you refresh the web page.
ARP Table
ARP is the abbreviation for Address Resolution Protocol, which maps an IP address to a
machine's hardware address. Network administrators use ARP to locate systems on the
LAN that are configured with incorrect IP addresses. This helps diagnose MAC
addresses that your router knows about.
To open the ARP table, choose ARP Table from the Diagnostics menu. The following
page will appear.
Figure 3-50: ARP page
The ARP statistics are defined below:
• IP address: The IP address corresponding to the media-dependent 'physical'
MAC address.