User's Manual

Version 3.03 SPEEDLAN 9000 Series Installation and Operation User Guide
3-58 General Functions of the Configurator
• Address(es) to Share: Select a virtual address from this drop-down list. You
will need to select an Out Interface if using a virtual address from the
Address to Share list. This tells the SPEEDLAN 9000 which interface is
acting as the WAN for this operation.
• Share With: Do of the following:
• enter the wired or wireless private IP address where you want the public IP
address to be shared. Select a netmask that specifies a network or host
(/32), or
• select the interface that the private nodes are connected to
(e.g., Ethernet).
Click Add to implement this setting. This will also be added to the Existing Shares list on
the bottom of this page.
Note: Click the Back To Address Sharing link to return to the previous page.
Existing Shares
This list displays the public IP addresses that are being shared with the private IP nodes.
To remove an existing share, select its check box and then click Delete Selected. Click
All to select all shares. Click None to clear all selections.
Internal Servers
Use this feature to host public (Internet) services with internal (privately addressed)
servers on your network. This allows you to offload services to multiple servers for a
given public IP address. To activate this feature, choose Internal Servers from the
Forwarding menu. The following page will appear: