User's Manual

SPEEDLAN 9000 Series Installation and Operation User Guide Version 3.03
General Functions of the Configurator 3-53
5 Click Add Service to add the service to the Existing Services list on the
Services page. (In the next figure, you can see the user’s new service, "AIM",
circled in red.)
Figure 3-41: New service added to existing services list
Existing Services
The Existing Services list shows all defined services.
• Service Name: The name of the service.
• IP Protocol: The IP protocol by which data sent from one network node to
another is classified (e.g., TCP, UDP, ICMP, OSPF).
• Port: A number used in the TCP and UDP protocols to differentiate
streams. The number is included in the transmitted packets to link the
incoming data to the correct service (e.g., port 80 is used for HTTP).
Note: To remove a service, select its check box and click Delete Selected. Click All
to select all of the existing services. Click None to clear all selections. If an entry has
(In Use) instead of a check box, this means the service is in use and cannot be
removed.