User's Manual

SPEEDLAN 9000 Installation and Operation User Guide
4-4 Using SPEEDView
Note: The Status box (blank text box) at the bottom of the screen displays the status of the
connection.
Note: You can change the default text for the SPEEDView application by clicking
Start+Settings+Control Panel+Display+Appearance tab. Then, select the appropriate item in
the Item list.
6 Next, the Interface Selection box appears which displays all the wireless interfaces that are
connected to the SPEEDLAN 9000 system.
7 Highlight the interface and click Select.
8 The following elements are displayed on this box:
• Description: A name for the interface (e.g., where it is located). This can be changed
in the Configurator.
• Type : Star (for base to CPE functionality) or mesh (nodes in a NLOS pico cell). The star
or mesh network will display on the Main tab, as shown on the next page.
• IP Address: This address tells the network how to locate the computers or network
equipment connected to it.
• Netmask: The netmask is a 4-byte number that masks the network part of the Internet
Protocol IP address, so that only the host computer part of the IP address remains.
• Network: The address of the network.