User's Manual

SPEEDLAN 9000 Installation and Operation User Guide
Using the SPEEDLAN 9000 Configurator 3-5
Overview of the SPEEDLAN 9000 Configurator Main Menu
• Interfaces
Use this menu to view a list of the interfaces that exist on the router, such as wireless inter-
faces, fixed interfaces, or both. This is where you would assign either a static or dynamic
Internet address for the unit/router. You will also be able to define the display name for the
wireless or fixed device.
• System
Use this menu to define information about the host, view information about the SPEEDLAN
9000 Configurator, or set the current password.
• Routing
Use this menu to view and set the routing configuration.
• Wireless
Use this menu to select the frequency and data rate of the wireless device.
• DHCP Server
Use this menu to configure a DHCP server on one or more of the interfaces. You can also
view log messages and view the interfaces being serviced with DHCP.
• DHCP Relay
Click this menu to enable DHCP Relay and set the parameters it requires.
• NAT
Use this menu to configure Name Address Translation (outgoing and incoming) on the
SPEEDLAN 9000 unit/router.
• Diagnostics
Use this menu to troubleshoot your SPEEDLAN 9000 network and reboot / power off the
SPEEDLAN 9000 unit/router.
• Admin
Use this menu to perform administrative tasks, such as setting up user password information
and permissions. You can also replicate certain configuration to other SPEEDLAN 9000
units/routers from this menu to automate network configuration.