User's Manual

ManualsBrandsWave Wireless Networking ManualsElectronicsSpread Spectrum Transmitter

Table Of Contents

Chapter 1 Introduction
Features and Benefits
- SPEEDLAN 9000 Series Features
- ISP Functionality
- Configuration and Monitoring
- Wired LAN Interface
- Wireless LAN Interface
- SPEEDView (A Network Management Tool)
- IP-Router Features
- Additional Functionality for SPEEDLAN 9000 RF cable loss is negligible
Equipment Features
SPEEDLAN K2's Polling Protocol -- How it Works in Star Networks
- Point-to-Multipoint Functionality
- Point-to-Point Functionality
SPEEDLAN 9000 Mesh Protocol -- How It Works in Non-Line-of-Sight Networks
- Routing Around Obstacles
- SPEEDLAN’s NLOS Pico Cell Architecture
- SPEEDLAN 9000 Mesh Protocol's Core Components
- Network Expansion: Connecting Buildings in a SPEEDLAN 9000 Network
Chapter 2 Installing the SPEEDLAN 9101 & SPEEDLAN 9102 Hardware
Rooftop and Tower Installations Warning
Hardware Overview
Drawings of Outdoor, Remote-Mounted Components
- Indoor Junction Box
The SPEEDLAN 9101 (with an Attached Standard Omni)
- Bottom View of SPEEDLAN 9101
- System Description
- Package Contents
- Installation Steps for the SPEEDLAN 9101
- Installation Diagram of the SPEEDLAN 9101
The SPEEDLAN 9102 (with an External Antenna)
- Bottom View of SPEEDLAN 9102
- System Description
- Package Contents
- Installation Steps for the SPEEDLAN 9102
- Installation Diagram of the SPEEDLAN 9102
Chapter 3 Using the SPEEDLAN 9000 Configurator
Initial Configuration of the SPEEDLAN 9000
- Prerequisites
- Configuring the SPEEDLAN 9000
- Wireless Interface IP Address Assignment
- Automating the Configuration of Multiple SPEEDLAN 9000s
- Completing Configuration
- Adding Additional SPEEDLAN 9000s to the Wired Network
Overview of the SPEEDLAN 9000 Configurator Main Menu
Logging on to the SPEEDLAN 9000 Configurator
- Logging On
- After Logging On
Interfaces
- Setup
- Interface Parameters
System
- General/System Information
- Performance
- Password
Routing
- Def Gateway
- Route Table
- Static Route
Wireless
- Configuration
DHCP Server
- How DHCP Assigns an IP Address
- Basic Instructions for Setting Up DHCP on an Interface
- Elements Defined on the General and Known Client Pages
- Viewing Log Messages
- Enabled Interfaces
DHCP Relay
NAT
- Outgoing NAT
- Incoming NAT
Diagnostics & Troubleshooting
- Interface Statistics
- ARP Table
- ICMP Statistics
- Connectivity
- System Control
Administrative Access Pages
- User Configuration
- Replication
- Remote Control
- Factory Reset
Chapter 4 Using SPEEDView
What is SPEEDView?
System Requirements
Installation Instructions
Starting SPEEDView
- Star Network
- Mesh Network
The Program Instructions
The Main Tab
- The Main Tab Icons
- The Node, Link, Stats and View Menus (on the Main tab)
- Buttons (on the Main tab)
- Performing a Bandwidth Test
- Performing a Ping Test
- Accessing the Statistics Tabs on Bottom of Main Tab
Options Tab
Admin Tab
Chapter 5 Basics of IP Addressing
Basics of IP Addressing
- What is an IP address?
- Internet Address Classes
- Subnetting a Network
- How does a network administrator assign an IP address?
- What is DHCP?
- What is NAT?
- NAPT
- Diagram of Outgoing NAT
- Diagram of Incoming NAT
Glossary for Standard Data Communications
Glossary for Standard Data Communications
Software License Agreement
- Wave Wireless Networking LIMITED WARRANTY STATEMENT

Chapter 3

Using the SPEEDLAN 9000

Configurator