User's Manual
Table Of Contents
- Chapter 1 Introduction
- Features and Benefits
- Equipment Features
- SPEEDLAN K2's Polling Protocol -- How it Works in Star Networks
- SPEEDLAN 9000 Mesh Protocol -- How It Works in Non-Line-of-Sight Networks
- Chapter 2 Installing the SPEEDLAN 9101 & SPEEDLAN 9102 Hardware
- Rooftop and Tower Installations Warning
- Hardware Overview
- Drawings of Outdoor, Remote-Mounted Components
- The SPEEDLAN 9101 (with an Attached Standard Omni)
- The SPEEDLAN 9102 (with an External Antenna)
- Chapter 3 Using the SPEEDLAN 9000 Configurator
- Initial Configuration of the SPEEDLAN 9000
- Overview of the SPEEDLAN 9000 Configurator Main Menu
- Logging on to the SPEEDLAN 9000 Configurator
- Interfaces
- System
- Routing
- Wireless
- DHCP Server
- DHCP Relay
- NAT
- Diagnostics & Troubleshooting
- Administrative Access Pages
- Chapter 4 Using SPEEDView
- What is SPEEDView?
- System Requirements
- Installation Instructions
- Starting SPEEDView
- The Program Instructions
- The Main Tab
- Options Tab
- Admin Tab
- Chapter 5 Basics of IP Addressing
- Basics of IP Addressing
- Glossary for Standard Data Communications
- Glossary for Standard Data Communications
- Software License Agreement
SPEEDLAN 9000 Series Installation and Operation User Guide
2-2 Installing the SPEEDLAN 9101 & SPEEDLAN 9102 Hardware
Rooftop and Tower Installations Warning
Rooftop, tower and mounted equipment (routers) installations are extremely dangerous and incorrect
installation can result in death, injury, or property damage.
Hardware Overview
The SPEEDLAN 9000 series contains the following units/routers: SPEEDLAN 9101 and the
SPEEDLAN 9102. For more information, see Equipment Features, page 1-4. All SPEEDLAN 9000
series equipment (SPEEDLAN 9101 and SPEEDLAN 9102), use the outdoor, remote-mounted
chassis and are installed on the rooftop (on pole or mast). The following are components for both
the SPEEDLAN 9101 and SPEEDLAN 9102:
Drawings of Outdoor, Remote-Mounted Components
Indoor Junction Box
The indoor junction box is used with the SPEEDLAN 9101 and SPEEDLAN 9102.
When the green light is illuminated, the
DC voltage is injected
DC jack to power supply