User's Manual

SPEEDLAN 8500 Series Installation and Operation User Guide
Setting Up the IP Addresses (IP Host Setup) 7-23
4 The Incoming Address Translation Setup dialog box appears.
5 Enter the appropriate incoming information:
• Public IP Address
This is the IP address for the outside network. If you have more than one public
address, you can assign it to a node on the private network (One-to-One NAT).
Therefore, all requests for a particular IP address from the outside or public network will
be translated to the appropriate private IP address. This may be necessary if you have
a server or workstation (or computer) that needs to be connected to a remote network.
• Private IP Address
This is the IP address for the inside network only, which hides behind the public IP
address.
• Private IP Mask
This address assigns the Subnet mask to the private network interface.
Note: Click Select to view the IP Mask List. Select the appropriate IP Mask and click OK.