Specifications

G/07171
Version1.6
13/02/2008
WX-5095 Handbook
Commercial In Confidence
7 of 31
3. Connections
3.1 Power
The X-Stream runs from a 12Vdc power source. It draws less than 200mA . As standard, the unit is supplied
with an approved 240Vac / 12Vdc, 300mA power adaptor with a concentric dc power plug, 2.1mm centre pin
positive.
3.2 Audio Out
The isolated audio is output on the RJ12 jack for connection to the Telephone system’s Music-On-Hold (MOH)
port. The default output is around 500mV p-p to suit most modern phone systems however this can be adjusted
on the
X-Stream web page. There is an inbuilt Line Isolation Unit (LIU) so there is no need to have an
external LIU.
There are three audio output configurations possible.
1. Standard Single Feed – use the RJ12 jack with the inbuilt LIU. This is the most common configuration
with either mono or stereo (combined to mono) audio.
PIN DESCRIPTION
1 Not connected
2 Not connected
3 Ring (Lb) – Sleeve, ground return
4 Tip (La) – Signal, left & right audio mixed to mono
5 Not connected
6 Not connected