Installation Manual

4
OPTIONAL NEUTRAL WIRING
For applications requiring neutral wiring, remove tab as shown to expose terminals for wiring.
Breakaway
tab
Optional neutral terminals
behind breakaway tab
8" flying leads for line,
load, ground and
multi-way connections
PW-302 shown.
The PW-301 does
not include these
two leads
Yellow
Red
Green
Black
Brown
Blue
MULTI-WAY
The Multi-Way capability is available on all models. Sensors can easily be wired together for convenient control of a common load.
When wiring this way, only use 300 series sensors. Multi-Way in 300 series is not compatible with prior sensor models.
The following principles apply for Multi-Way:
• All units can see each other’s push button events and respond accordingly.
• All units can see each other’s PIR trigger event. The response will be determined by the Light Level setting and/or conditions of the
space of the detecting sensor.
• The time delay for all units is defined by the unit with the smallest time delay.
Black
Load
Red
Black
Neutral
Neutral
(optional)
Line
Neutral
(optional)
Ground
Green
Ground
Green
Yellow
traveler
Yellow
Red
Black
Black
Neutral
Neutral
(optional)
Line
Yellow
Red
Primary
Load
Brown
Secondary
Load
Neutral
(optional)
Gr
ound
Green
Ground
Green
Red
Brown
Blue
Blue
Black
Black
Neutral
Gr
ound
Neutral
(optional)
Line 1
Yellow
Red
Primary
Load
Brown
Secondary
Load
Neutral
(optional)
Blue
Blue
Green
Ground
Green
Red
Brown
Line 2
Neutral
NOTE:
Button 1 on any sensor controls load #1 and
button 2 on any sensor controls load #2.
Typical Wiring
(PW-301 or PW-301-347 up to 4 sensors)
Bi-level Wiring
(PW-302 or PW-302-347 up to 4 sensors)
Two-phase Wiring