Cut Sheet

WWW.LEGRAND.US/WATTSTOPPER
Pub. No. 28085r3 Rev.1/20019
• Input voltage: 24VDC, 16mA
• Control output for 0-10VDC ballasts: Sinks up to 50mA;
maximum voltage, 9.5VDC, minimum voltage, 0.75VDC
Consult ballast/driver manufacturer to determine 0-10V mA
output
• Dimensions: 2.64” x 1.75” x 1.98” (67.1mm x 44.5mm x
50.3mm) L x W x D; depth in wall 1.65” (41.9mm)
• Operating conditions: for indoor use only; 32-104°F (0-40°C);
0-80% RH, non condensing
• UL and cUL listing pending
• Five year warranty
Specifications
Wiring
0-10V Wiring On/Off Wiring
Button Functions
Ordering Information
Catalog #
Description Input Voltage Color
DCLV2-W 0-10V Decorator Lighting Dimmer 24VDC White
DCLV2-LA 0-10V Decorator Lighting Dimmer 24VDC Light Almond
DCLV2-I 0-10V Decorator Lighting Dimmer 24VDC Ivory
DCLV2-B 0-10V Decorator Lighting Dimmer 24VDC Black
DCLV2-G 0-10V Decorator Lighting Dimmer 24VDC Gray
DCLV2-R 0-10V Decorator Lighting Dimmer 24VDC Red
Order Wall Plates and Power Packs separately.
Neutral
Hot
White
Black
Red
Red
Fixture
**Ground
Red
Black
Blue
Orange
Brown
Gray
Low Voltage Wires
24VDC
0–10V
Control
0–10V
Common
Red
VioletGray
Black
Power Pack
BZ Series
DCLV2
Blue
Sensor
Blue
Neutral
Hot
White
Black
Red
Red
Fixture
**Ground
Red
Black
Blue
Orange
Brown
Gray
Low Voltage Wires
24VDC
Control
Common
Red
Black
Power Pack
BZ Series
DCLV2
Blue
Sensor
Blue
WDS ODVWQRQ]HUROHYHO
WDSV IXOORXWSXW
3UHVVDQGKROG UDLVHOHYH
O
WDS IDGHWR2))
3UHVVDQGKROG ORZHUOHYHO
0-10V Wiring for use with a Sensor
Neutral
Hot
White
Black
Red
Red
Fixture
Sensor
Ceiling/Wall
24VDC
Any
**Ground
Red
Black
Blue
Orange
Brown
Gray
Low Voltage Wires
24VDC
0–10V
Sensor
Control
0–10V
Ground
Common
Red
VioletGray
Black
Black
Control Output
+24VDC
Red
Common
Power Pack
BZ Series
DCLV2
Blue
Blue
Blue
NOTE: For all wiring applications, if BZ Power Pack model
includes a DIP switch, do not set switch to “Manual”)
%27+),1*(56
7232)',00(5
%277202)',00(5
LEARN/Select
Press the switch
with both fingers
(just enough to push
both toggles inward).
Then select the
appropriate mode.
RAISE/Auto On
Raise the dim level.
While in LEARN Mode:
A Red LED Confirms
that the Auto On Mode
is selected.
LOWER/Manual On
Lower the dim level.
While in LEARN Mode: A
Green LED Confirms that
the Manual On Mode is
selected.
Changing the Mode